How can we control the quality of the mold?

2021-03-23 15:25:56 admin

How can we control the quality of the mold?




Medical mold finishing process control




For the processing of medical mold parts, an overall guiding ideology is to adapt processing to different materials, shapes and different technological requirements. It has a certain degree of plasticity, and a good processing effect can be obtained by controlling the processing.




Heat treatment of medical mold parts




For the heat treatment process of parts, we need a parts company to obtain the required hardness, and at the same time, by controlling the internal structural stress of the system, to ensure the dimensional stability of the parts during processing, and to analyze and process different materials. In recent years, with the development of my country's medical mold industry, the types of materials used have increased. In addition to Cr12, 40Cr, Cr12MoV, and cemented carbide, some social work can be managed with high-strength and powerful punches and new material powder alloy steels (such as V10, ASP23, etc.).




The quality of the medical mold directly determines the quality of the product.




Grinding parts




There are three main types of machine tools used for grinding: flat grinders, internal and external grinders, and tool grinders. Grinding processing must strictly control the occurrence of grinding deformation and grinding cracks, and very small cracks are also used in subsequent processing. Therefore, the grinding of the knife should be small, the coolant should be sufficient, and the parts with a size tolerance of less than 0.01 mm should be ground to a certain temperature as much as possible.