Injection Mold-Vacuum Cleaner Shell Injection Mold

Injection Mold-Vacuum Cleaner Shell Injection MoldInjection Mold-Vacuum Cleaner Shell Injection MoldMould material: use Datong steel material Longji mould blank, mould life can be customized according

  • 型号:
  • 型号: Injection Mold-Vacuum Cleaner Shell Injection Mold

Injection Mold-Vacuum Cleaner Shell Injection Mold


Injection Mold-Vacuum Cleaner Shell Injection Mold


Injection Mold-Vacuum Cleaner Shell Injection Mold


Mould material: use Datong steel material Longji mould blank, mould life can be customized according to customer requirements, production times can be as high as 1 million mould times.

Mold tolerance: ±/0.02mm accuracy, 10 years of senior design team provides a full set of drawings.


Scope of application: Mainly used in small household appliances, maternal and child products, power tools, electronic equipment peripheral products, computer peripheral keyboards, liquid silicone, rubber, etc.

Plastic mold Plastic mold processing Injection mold processing Injection mold factory Injection mold manufacturer


In order to meet the production needs, it is often necessary to use forming molds or special molds, mainly bridge molds, shutter molds, counterbore molds, turning and tapping molds, boss molds, drawing molds, combined molds, etc., using special or Forming molds improve production efficiency by everyone, but the price of foot forming molds is higher, usually 4-5 times that of ordinary molds. In order to avoid errors in plastic mold processing, the following principles should be noted and followed:




   1. Use a lower punching speed.

  2, the plate should be flat without deformation or warping.

  3, plastic mold processing, forming processing, lying down should be as far away as possible from the clamp.

  4. When using forming molds, avoid downward forming operations:

  5. When stamping, press the ordinary mold first, and finally use the forming mold.

  6. When the mold is installed, check the direction to ensure that the mold male and female molds are installed in the same direction.

  7. Correctly adjust the punching depth of the mold according to the requirements, and each adjustment should not exceed 0.15mm.