Two-color mold-filter cigarette holder two-color mold

Two-color mold-filter cigarette holder two-color mold1. Customized injection mold processing workpieces are positioned on the planeAccording to the number of degrees of freedom restricted by the plane

  • 型号:
  • 型号: Two-color mold-filter cigarette holder two-color mold

Two-color mold-filter cigarette holder two-color mold


Two-color mold-filter cigarette holder two-color mold

1. Customized injection mold processing workpieces are positioned on the plane


According to the number of degrees of freedom restricted by the plane, there are three types:


The main bearing surface restricts the three-degree-of-freedom positioning plane of the workpiece, which is often used for the positioning surface of the workpiece with high accuracy.


The guide bearing surface restricts the positioning plane of the workpiece with two degrees of freedom, and is often made into a narrow and long surface.


The thrust bearing surface limits a plane of freedom. In order to ensure accurate positioning, the plane area is often made as small as possible.


2. Customized processing workpieces of injection molds are positioned with round holes


Long pins limit 4 degrees of freedom; short pins limit 2 degrees of freedom.




3. Positioning outside the cylindrical surface of the injection mold custom processing workpiece


The positioning datum is the center line of the outer circle. There are three commonly used


Positioning sleeve: realizing centering positioning Support plate: positioning the outer circle


V-shaped block: realize the centering and positioning of the outer circle surface