Electric mask mould

Electric mask mouldEveryone knows that China is doing a better job of making injection molds in Shenzhen! Is this bull blown out? No, Shenzhen is indeed an injection mold manufacturing technology and

  • 型号:
  • 型号: Electric mask mould

Electric mask mould


Electric mask mould


Everyone knows that China is doing a better job of making injection molds in Shenzhen! Is this bull blown out? No, Shenzhen is indeed an injection mold manufacturing technology and method that can be touted. First of all, we must improve the precision of injection mold manufacturing. In the mold design stage, we must strictly check the size, especially for high-precision instrument products. The size requirements are stricter. Only molds with extremely small errors can meet the requirements of such products. Therefore, the first pass must be checked in the mold design stage.


       注塑模具深圳

Secondly, after the design of injection mold manufacturing is completed, professional equipment is needed for manufacturing. For example, CNC, milling machine, grinder and other equipment require professional technical personnel to operate, so it is necessary to train professional technical engineers for injection mold manufacturing and learn about molds. know how. In short, Shenzhen is relatively good in the introduction of mold equipment, and the mold technology training tutorial software is also relatively advanced. Therefore, manufacturing injection molds in Shenzhen is quite good!


  When the injection mold manufacturer in Shenzhen uses pom material, can the nozzle material be used as a normal ingredient? The answer given by the editor is: Yes, but you must pay attention to the proportion of ingredients and the number of trials of the nozzle. The pom nozzle cannot be used 3 times normally. If you use more times, the function of the pom material will be lost.


注塑模具深圳

Some injection mold manufacturers in Shenzhen set the temperature of pom material too high, and the performance of the material itself cannot be burned and carbonized, so that the nozzle material cannot be recycled. Even if you use that kind of nozzle product, it is not very smooth and sticky. Mold, top height, deformation, and scorch are common occurrences.


注塑模具深圳

 

Experienced injection mold manufacturers in Shenzhen use pom materials as follows: 1. Pom materials can be produced without baking or spattering, but the temperature of the injection molding machine must be set reasonably, 200.190.180.170. It is more common. 2. When the nozzle material is used for trial use, it is sometimes necessary to dry the material, because the nozzle material and raw materials are stored and packaged differently. 3. There are no major problems in the use of pom nozzle material (1 nozzle) and the production of 50% of the raw materials. Pay attention to the premise of setting the temperature of the injection molding machine. During the production of pom material, it is not allowed to stop the machine casually. As long as the machine stops for more than 30 minutes, the material will be carbonized in the barrel and emit a very irritating smell. Be sure to pay attention!